Loud Technologies - Eaw - Smaart V6.0 Options

[www.yourforum.gr]

Smaart is the most straightforward and widely used software for real-time sound system measurement, optimization and control, and now, it¢s also backed by the full weight of EAW¢s renowned development and support services.
Smaart v.6 performs dual-channel, FFT-based audio measurement in an intuitive, accessible interface that seamlessly integrates measurement, analysis, and data logging. It can also remotely control an extensive, constantly expanding list of professional equalizers and DSP processors.
Rebuilt from the ground up, Smaart v.6 features significantly modernized architecture to unleash the potential of the latest microprocessors and multitasking operating systems.
Further, Smaart v.6 now runs native under both Mac OS X and Windows from the same unified source code. While the Windows platform has been the dominant platform for pro audio system engineering for the past decade, the OS X platform has always retained significant penetration and is rapidly becoming the preferred platform throughout the professional audio market.
Smaart v.6 also features a new, streamlined interface that enables users to tap the power of the new software architecture while preserving the renowned usability of previous Smaart versions – developed from over decade of input from the largest (and still rapidly growing!) user base in the industry.

Support for ASIO Multi-Channel Input Devices

Smaart v.6 can receive multi-channel inputs via ASIO under Windows or Core Audio on Mac OS X, enabling selection of measurement signals from a multi-channel device within Smaart. This new data acquisition module opens up a vast array of multi-channel audio devices now available on the market, such as the Mackie Onyx 800F FireWire preamp. It also greatly simplifies the hardware setup requirements for operating a multi-microphone Smaart measurement rig.

New Real-Time Measurement Mode

All Smaart real-time measurements (RTA, Spectrograph, Transfer Function (magnitude and phase), and Impulse Response now run concurrently, and any two measurements can be viewed simultaneously. The result is the ability to run hybrid measurement modes that display real-time Spectrum and Frequency Response data at the same time. This platform allows operators to significantly expand the way they measure and address their sound systems.

Two-Channel RTA: Selectable linear or fractional octave banding (down to 1/24th octave resolution), peak-hold, THD calculation, user-defined timed averaging, and standard Noise Criterion curves (when calibrated for SPL measurement).
Single-Channel Spectrograph: 3-D display of a signal¢s spectral content over time helps identify feedback frequencies, system resonances, and mechanical noise.
Frequency Response Magnitude & Coherence: Measurements down to 1/24th octave resolution of system magnitude response with comprehensive rms and vector averaging functionality and a corresponding Coherence measurement indicating data quality/stability.
Phase Response: Measurements down to 1/24th octave resolution of system phase response.

Enhanced Impulse Response Mode

Impulse Response Mode now operates in its own window that runs independently of real-time Spectrum and Transfer Function measurements. The Impulse Response Mode has also been expanded to include intuitive tools for analyzing and dissecting IR measurements on the fly, such as a user-specified time window function for retrieving frequency domain data from specific portions of an impulse response.

Expanded Signal Generator Functionality

Smaart v.6 adds triggered swept sine waves for impulse response measurements to its standard list of generator signals and functions. The triggered swept sine functionality operates with the FFT length-specific, synchronized measurement sources, and enables the user to do traditional laboratory and QC measurements.

Increased Data Storage and Display Capacity

Smaart v.6 has dramatically increased capability for storing, recalling, and displaying a virtually unlimited number of reference data traces such as Frequency Response and RTA. Moreover, all captured measurements are now stored directly to the hard drive to prevent accidental loss due to power failures or other interruptions. Advanced trace averaging capabilities have also been added.

Object-Oriented, Multi-Threaded Program Architecture

Multiple sessions of Smaart can now run simultaneously, allowing for the integration of multiple simultaneous system measurements in later releases. A new API (Application Programming Interface) allows other software programs – even third party programs such as Dolby Lake - to import Smaart data and control the Smaart measurement engines remotely. And, with code base portability, Smaart¢s measurement engines are now separate code “objects” that can be integrated into other EAW/LOUD Technologies products such as the SPL meter on the new EAW UMX.96 digital mixing console.

Powerful new architecture and streamlined interface
Now operates with ASIO multi-channel input devices
New Real-Time measurement mode and enhanced Impulse Response mode
Increased data storage and display capability
Expanded Signal Generator functionality

CODE

http://rapidshare.com/files/68655645/LdTchnlgsEAWSmrt.rar

[www.yourforum.gr]

Loud Technologies EAW Smaart 6.1 (PC – MAC)

Loud Technologies EAW Smaart 6.1 (PC – MAC) | 10 MB
Smaart is the most straightforward and widely used software for real-time sound system measurement, optimization and control, and now, it¢s also backed by the full weight of EAW¢s renowned development and support services. Smaart v.6 performs dual-channel, FFT-based audio measurement in an intuitive, accessible interface that seamlessly integrates measurement, analysis, and data logging. It can also remotely control an extensive, constantly expanding list of professional equalizers and DSP processors. Rebuilt from the ground up, Smaart v.6 features significantly modernized architecture to unleash the potential of the latest microprocessors and multitasking operating systems. Further, Smaart v.6 now runs native under both Mac OS X and Windows from the same unified source code. While the Windows platform has been the dominant platform for pro audio system engineering for the past decade, the OS X platform has always retained significant penetration and is rapidly becoming the preferred platform throughout the professional audio market. Smaart v.6 also features a new, streamlined interface that enables users to tap the power of the new software architecture while preserving the renowned usability of previous Smaart versions – developed from over decade of input from the largest (and still rapidly growing!) user base in the industry.
Support for ASIO Multi-Channel Input Devices
Smaart v.6 can receive multi-channel inputs via ASIO under Windows or Core Audio on Mac OS X, enabling selection of measurement signals from a multi-channel device within Smaart. This new data acquisition module opens up a vast array of multi-channel audio devices now available on the market, such as the Mackie Onyx 800F FireWire preamp. It also greatly simplifies the hardware setup requirements for operating a multi-microphone Smaart measurement rig.
New Real-Time Measurement Mode
All Smaart real-time measurements (RTA, Spectrograph, Transfer Function (magnitude and phase), and Impulse Response now run concurrently, and any two measurements can be viewed simultaneously. The result is the ability to run hybrid measurement modes that display real-time Spectrum and Frequency Response data at the same time. This platform allows operators to significantly expand the way they measure and address their sound systems.
* Two-Channel RTA: Selectable linear or fractional octave banding (down to 1/24th octave resolution), peak-hold, THD calculation, user-defined timed averaging, and standard Noise Criterion curves (when calibrated for SPL measurement).
* Single-Channel Spectrograph: 3-D display of a signal¢s spectral content over time helps identify feedback frequencies, system resonances, and mechanical noise.
* Frequency Response Magnitude & Coherence: Measurements down to 1/24th octave resolution of system magnitude response with comprehensive rms and vector averaging functionality and a corresponding Coherence measurement indicating data quality/stability.
* Phase Response: Measurements down to 1/24th octave resolution of system phase response.
Enhanced Impulse Response Mode
Impulse Response Mode now operates in its own window that runs independently of real-time Spectrum and Transfer Function measurements. The Impulse Response Mode has also been expanded to include intuitive tools for analyzing and dissecting IR measurements on the fly, such as a user-specified time window function for retrieving frequency domain data from specific portions of an impulse response.
Expanded Signal Generator Functionality
Smaart v.6 adds triggered swept sine waves for impulse response measurements to its standard list of generator signals and functions. The triggered swept sine functionality operates with the FFT length-specific, synchronized measurement sources, and enables the user to do traditional laboratory and QC measurements.
Increased Data Storage and Display Capacity
Smaart v.6 has dramatically increased capability for storing, recalling, and displaying a virtually unlimited number of reference data traces such as Frequency Response and RTA. Moreover, all captured measurements are now stored directly to the hard drive to prevent accidental loss due to power failures or other interruptions. Advanced trace averaging capabilities have also been added.
Object-Oriented, Multi-Threaded Program Architecture
Multiple sessions of Smaart can now run simultaneously, allowing for the integration of multiple simultaneous system measurements in later releases. A new API (Application Programming Interface) allows other software programs – even third party programs such as Dolby Lake – to import Smaart data and control the Smaart measurement engines remotely. And, with code base portability, Smaart¢s measurement engines are now separate code “objects” that can be integrated into other EAW/LOUD Technologies products such as the SPL meter on the new EAW UMX.96 digital mixing console.
Recommended Computer Requirements
* Windows: OS: Windows 2000, XP (or higher)
* CPU: 1 GHz or faster Intel Pentium or compatible
* RAM: 512 MB to 1 GB or more
* Display: minimum 1024 x 768 pixels with 16 bit color
* Audio Hardware: Windows-compatible (Wave/WDM or ASIO) with stereo line level input, 16-bit/44100 to 24-bit/96000 sampling with full-duplex (simultaneous play and record) capability
* Mac: OS: Mac OS X 10.4 (Tiger) or higher
* CPU: Apple Macintosh family CPU with minimum 1 GHz or faster G4, G5, or compatible Intel microprocessor (e.g., Centrino Duo)
* RAM: 512 MB to 1 GB or more
* Display: minimum 1024 x 768 pixels with 16 bit color
* Audio Hardware: Apple Core Audio compatible with stereo line level input, 16-bit/44100 to 24-bit/96000 sampling with full-duplex (simultaneous play and record) capability

Loud.Technologies.EAW.Smaart.v6.1-UNION



http://rapidshare.com/files/378449098/LDTCHNLGSEAWSMRTV61-UNN.rar



http://hotfile.com/dl/39089160/9d3db23/LDTCHNLGSEAWSMRTV61-UNN.rar.html


http://ul.to/q3ao63

Loud.Technologies.EAW.Smaart.v6.1.MAC.OSX-UNION

Download:

http://rapidshare.com/files/378449095/LDTCHNLGSEAWSMRTV61MOSX-UNN.rar



http://hotfile.com/dl/39089017/13cbe3b/LDTCHNLGSEAWSMRTV61MOSX-UNN.rar.html



http://ul.to/uq945d

http://avaxhome.ws/blogs/avaxklan