 Recover A Raid-0 (stripped) Array ... |
|
|
|
|
||||||||
|
|
|
|
||||||
|
|
|||||||||
|
| Recover A Raid-0 (stripped) Array ... |
 9 Oct 2011, 05:53 PM
Post
#1
|
|
 No comments  Group: Admin Posts: 31721 Joined: 8-July 05 Member No.: 121 Zodiac Sign:  Gender:   |
I had a PSU problem on a desktop PC running a Promise IDE RAID controller with 2 x IDE drives on a stipped array ...
after replacing the faulty PSU i was sad enough to notice the RAID volume was unreadable this is common when one of the two discs of the array goes bad but S.M.A.R.T and diagnostics on the RAID controller showed both discs as fine so i tried a different approach, after looking around a bit 1. First problem was to try re-import the discs as foreign to the partition and see if the dynamic status changes BEWARE : do NOT use Operating System to convert Dynamic to Basic, you will lose all data NOTICE : do NOT recreate an array clearing drives WARNING : do everything at your own risk, this could seriously damage your data ! so, here we go : --------------------  |
 |
 Bookmark this:          
|
www.yourforum.gr Recover A Raid-0 (stripped) Array ... 9 Oct 2011, 05:53 PM
www.yourforum.gr I just recently moved and I had movers pack us up ... 9 Oct 2011, 05:56 PM
www.yourforum.gr this did not work like it should so we are brought... 9 Oct 2011, 06:00 PM  |
  |
Lo-Fi Version | Time is now: 6th July 2025 - 03:39 PM |
| Skin and Graphics by Dan Ellis and Anubis. Hosting by Forums & More © 2005-2011. |
